14
Open Local Config File
Load configuration from hard drive, usb drive, etc.
Save Local Config File
Save configuration on hard drive, usb drive, etc.
Load Default Configuration
Select and load a typical SPIDER configuration (control of 1 or 2 pumps, groundwater
lowering, etc.)
Backup operations
Mirrors the counters etc. in the SPIDER controller. (Is used for updating or replacement of
the modem)
Device settings
Advanced settings. (Further description on page 22.)
Show status.
Supervison and status bits. (Further description on page 24.)
New AcowaZoo version available.
Update AcowaZoo firmware (Is only shown when a newer version is available)
Settings selection
Here you select which part of the SPIDER device's settings
to display in the settings window on the right.
AI1:
Analog Input settings.
I1 - I6:
Input Settings 1-6
Output 1-4: Output Settings 1-4
