Operating Instructions DMMS_DIGISYS
ACO A
utomation
Co
mponents
46
PC-software DMMS/DIGISYS
Other
Entry fields for special functions:
Function
Description
Range
Default
Take cycle
sample
Sampling rate (values / seconds) in the function.
"Take sample".
0.1-10s
0.1 s
CMW pause
Number of pauses during median value calculation, to pre-
vent overflow.
Batch processes lasting longer than 15 min or loading.
The delay time and the peak time are also then extended!
0..255
0
ADW- rate
Setting AD- conversion sensor. For test purposes only - do
not modify!
0..255
10
Temperature
gradient
The measured value of certain materials is temperature-
dependent. An entry in measured parts per Kelvin (°C ) can
compensate for this.
127..128
T/K
0 T/K
Peak time
Peak value within the peak time during measuring mode
„..MW continuous“
i.e. for interfering air bubbles in the material. (0 = off
0..8s
off
Sensitivity
x1= normal, x2 = double resolution,
x10 = 10-time resolution
Caution: overflow during 32768 measuring parts, 2..10-time
offset.
x1, x2 ,x10
x1
Material
Display of the material number
curves
0
