ACO FUNKI Egebjerg MASTER Chain, Manual

Page: 6 / 24

09-11-2018 · ACO FUNKI · Tlf. 97119600 · www.acofunki.com Page 6
MASTER CHAIN
®
FEEDING SYSTEM
Bends
Where the feed mechanism changes to another level, the feed must be lifted via piping at a 45-degree slope, if
possible. This reduces the risk of segregation while at the same time causing minimum strain on the system. The
return pipe, on the other hand, may be lead down vertically.
Z piping and two bends, assembled at a right angle, are to be avoided wherever possible. This type of
installation causes the transport wire to twist and applies unnecessary strain on the system. If this
type of wiring is unavoidable, the distance between the bends must be a minimum of 2 metres.
Loading hopper
Place the loading hopper below the feed silo.
45˚
Min. 2 meter
365 365
5
1
5
5
8
2
4
0
0
4
0
0
Ø280
With gate Without gate
Ø280