ACO FUNKI Egebjerg MASTER Chain, Manual

Page: 3 / 24

Page 3 09-11-2018 · ACO FUNKI · Tlf. 97119600 · www.acofunki.com
FEEDING SYSTEM MASTER CHAIN
®
Preface
Thank you for selecting Egebjerg’s MASTER Chain  mechanic feeding system.
The feeding system comprises a number of quality products that, combined correctly, gives you a system
characterised by great operating efficiency and a long working life. To ensure the greatest possible benefit of your
new feeding system in the years to come, please read this manual and follow the instructions given carefully.
Should you have any questions once you have read the manual, place contact one of our service employees on
tel.: +45 59 36 05 05, fax: +45 59 36 05 55 or on e-mail: export@egebjerg.com.
Introduction
Egebjerg Master Chain
 is a modern dry feed dispenser system developed to transport animal meal or pelleted
feed with a diameter of up to 5 mm and a length of 10 mm from a silo to a number of feeding locations in the pig
barn.
The feed is transported in a galvanised steel piping system. The feed is transported via a chain or wire fitted with
cast plastic carriers that drives the feed to the feeding locations.
A computer-controlled drive unit drives the chain or wire. Once all feeding locations are full, a sensor switch
signals to the computer that the feeding system has been filled and must be stopped. The sensor switch is placed
after the last feeding location.
The drive unit is equipped with mechanical and electronic fuses against overload.
The loading system is placed below the silo, and doses the feed evenly and precisely into the piping system. Thus,
the loading hopper is indirectly decisive for the operating efficiency of the system and the working life of the feed
wire or feed chain.