Required materials: X-axis assembly, Y-axis section bar assembly, open-end
wrench 1PCS, M3*8 countersunk head screw 2PCS, M3*10 round head screw
材料：X轴组件，Y轴型材组件，开口扳手 1PCS, M3*10沉头螺丝 2PCS，M3*8半圆头螺丝
4PCS
Note：Before pushing the x-axis assembly into the Y-axis section bar, it is necessary
to adjust the eccentric wheel to increase the spacing between the pulleys on both
sides, to avoid damaging the pulley due to the too close spacing between the
pulleys during installation
Note：将X轴组件推进Y轴型材之前，需要调节偏心轮将两侧滑轮间距调大，以免安装时因
滑轮间距太近，损坏滑轮。
1. Assemble X-axis assembly
组装背板组件与Y轴型材组件
1.1 Adjust pulley spacin
调整滑轮间距
1.2 Draw the x-axis assembly into the Y-axis section bar as a whole
将X轴组件整体划入Y轴型材
Assembly Process | 装配过程
06
