![background image](http://html.mh-extra.com/html/acmer/p1/p1_manual_3046717020.webp)
After setting up the software, you can open the testfile folder in the delivered TF
card file. We have prepared the lightburn project file. You can directly open the file
corresponding to the laser power and start your carving
在设置完软件后,可以打开配送的TF卡文件中的testfile文件夹,我们准备了lightburn
的工程文件,您可以直接打开对应激光功率的文件并开始你的雕刻
In the grid area, place the file
to be engraved in the grid
雕刻网格区域,放置要雕刻的
文件在网格内
The basic parameters of the equipment
can be set as shown in the figure
设备基本参数设置,如图设置即可
Make sure your speed is in mm/min
请确保你的速度单位是mm/min
18