5
D
4/5. FMX input /output:
DMX 512 link, use 5 XLR cable to link the unit and DMX controller.
6. Power In:
To connect to the mains supply
7. Power Out:
To connect to the next lamp supply
4. How to set the fixture
4.1 Menu
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by the
ENTER
button and the display will blink. Use the
DOWN
and
UP
button to change the mode. Once the required mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button
again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu
mode.
The main functions are showing below:
