6. Troubleshooting
Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
A.
The fixture does not work, no light
1.
Check the connection of power and main fuse.
B. Not responding to DMX controller
1.
DMX LED should be on. If not, check DMX cables to see if linked properly.
2.
If the DMX LED is on and no response to the controller, check the address settings and DMX
polarity.
3.
If you have intermittent DMX signal problems, check the cables of the fixture or the previous
one.
4.
Try another DMX controller.
C. Some fixtures don’t respond to the easy controller
1.
You may have a break in the DMX cabling. Check the LED for the response of the master/
slave mode signal.
2.
Wrong DMX address in the unit. Set the correct address.
D. No response to the sound
1.
Make sure the fixture is not receiving a DMX signal.
2.
Check microphone by tapping it.
3.
Make sure the fixture is not set into Blackout mode
15E
Summary of Contents for Building wash
Page 1: ......
Page 9: ...BW 903VW AR 8E ...
Page 14: ...BW 903 WW AR BW 903 VW AR 13E ...
Page 18: ...17E ...
