![background image](http://html1.mh-extra.com/html/tbi-pro-engineering/indoor-bug-zapper/indoor-bug-zapper_quick-start-manual_823581001.webp)
Q U I C K S T A R T G U I D E
HOW TO REPLACE THE LIGHT TUBES
HOW TO CHANGE ATTRACTANT
STEP 4
Rotate gently the tubes until you see
the golden tube plug from the tube
socket gap. When you see the golden
tube plug connector in the tube socket
gap, then you have scrolled everything
correctly. After that, carefully remove
the lamp from the connector.
ATTENTION: When replacing the
lamp tube, you should hold the
lamp head part. Do not grab the
transparent glass tube to avoid
leaving fingerprints, sweat and
dirt, which will affect the ultraviolet
transmission effect.
STEP 5
STEP 6
Insert the replacement tubes with
new extra free 2 tubes. Insert
the replacement tubes with gold
connectors into the tube socket gap,
and gently scroll clockwise.
Close the protective grid. Press on it so
that it closes.
Insert the electrical plug to an outlet
and turn on the bug zapper to check
the light of the tubes.
STEP 1
STEP 2
Unplug the
power cord.
Remove the
Bug Tray.
STEP 3
STEP 4
Remove the attractant cartridge from the
sealed pouch and remove the protective cover
from the face of the cartridge.
Avoid touching the openings in the
cartridge and always wash your hands
thoroughly after contact.
Place the attractant at the spot marked in
bug tray on the picture.
Wash hands thoroughly after
handling.
Back the Bug tray in the Bug Zapper bottom.
Сhange the
attractant
every 30 days!