Page 111 / 141
DTUS065 rev A.7 – June 27, 2014
VII
WIRELESS TOPOLOGIES EXAMPLES
The WLn series are highly configurable devices allowing multiple wireless
topologies. The followings sections describe the most used ones.
For every topology, the characteristic parameters for this topology are
written in RED.
VII.1
Simple “Wireless cable”
In this mode, an access point and an infrastructure bridge pair just replaces
an existing Ethernet cable.
Configuration summary:
In this example, we are using 802.11a with 20MHz HT mode, channel 36,
country code FR and ACKSYS as ESSID. You can obviously change any of
these parameters as long as your choice makes sense.
Product
A
Device Configuration
Parameter
Value
Enable device
on
802.11 mode
802.11a
HT mode
20MHz
Channel
36
Country code
FR
Interface Configuration 1
Parameter
Value
Role
Access Point
ESSID
ACKSYS
Product
B
Device Configuration
Parameter
Value
Enable device
on
802.11 mode
same as product A
HT mode
same as product A
Channel
same as product A
Country code
any
Interface Configuration 1
Parameter
Value
Role
Client
Bridging mode
4 addresses format (WDS)
ESSID
same as product A
