Page 61 / 141
DTUS065 rev A.7 – June 27, 2014
Wireless overview section:
This page lists the most significant properties of the radio cards, organized
by SSID. In the bottom of the page you can change global Wi-Fi properties.
Click the “
Remove
” button to delete this SSID. Click the “
Edit
” button to
open the “
Radio
” window and edit this SSID properties.
Global parameters section:
Country:
The regulation rules of the selected country will determine the channels and
transmission powers you can use.
Cluster mode: (only for the products with multiple radio cards)
You can cluster the radio cards so that one radio is used to scan multiple
channels while the other connects to AP’s and transfers data. In this mode,
the scanning process does not disturb data transfers, but the scanner radio is
reserved for this use.
When “Group for scanning” is selected, the scan for APs occurs on one
radio card. The results are given to the other radio card so that it can select
the best AP for roaming purposes. This implies that the AP signal levels
must be the same for both cards; hence
their antennas positions, polarities
and cabling must be very close to each other
. The roaming trigger level
boost should not be set too small, to account for residual differences.
In this mode, the roaming parameters are taken from the configuration of the
radio card used for data transfers.
Create a new SSID
Edit
Remove
