Page 90 / 141
DTUS065 rev A.7 – June 27, 2014
Frame protocol:
The protocol type: TCP, UDP, TCP & UDP, ICMP, all
Port:
The destination port of the traffic. The port identifies the service.
Action:
One of:
Forward:
Forward traffic to the destination zone or device
Reject:
Drop packet and send ICMP message to the traffic source
Drop:
Drop packet without ICMP message.
Destination zone:
Zone where traffic will be forwarded.
VI.1.4.2
Static routes
In this section you can add a static route in the device.
Target:
Destination host or network IP address.
IPv4-netmask:
If the target is a network, you must set this field to the correct netmask.
If the target is a host, you can leave this field blank.
Metric:
Sets the metric for this route. Leave blank to use the default of 64.
MTU:
Set the MTU for this route. Leave blank to use the computed value.
