CALIBRATION
When to calibrate
Calibration may be required when it is initially installed, if the scale/balance is
moved to a substantial distance. This is necessary because the weight of a mass in
one location is not necessarily the same in another location. Also, with time and use,
mechanical deviations may occur.
How to calibrate
1.
Before entering calibration mode,
There is a switch key on the bottom of the
scale. Turn on the switch key first
, press
[ ]
to turn the power on for
1minutes.
2.Enter calibration mode
Press
[ ]
to turn the power on. the display will show flash digits and then
“
--------
”
, Press
[ ]
, the display will show “CAL.” , Press
[ ]
again ,
the display will show
“X0000
CAL
”
,
X
is flash digit. Press
[ ]
key the flash
digit will move to right; Press
[ ]
key to increase the flash digit.
(X is the
calibration weight which can be set according to your requirement).
3. Calibration by the weight
When you selected the calibration weight, and then place the calibration weight on
platform. Then press
[ ]
key
,
the display returns to the weight value. Now the
calibration is complete.
4
. Press
[ ]
, turn off the power, press
[ ]
to turn on the power again, place
the weight on the platform to make sure whether weighing is correct, if not, repeat
steps 2-4.
5. Return to weighing mode
Press
[ ]
to turn the power off. Press
[ ]
again to turn on the power and
the scale/balance return to the weighing mode.
5
PARTS DESCRIPTION
BACK SIDE
AC adaptor
Socket
TOP
·
Key pad function
1.
key: Turn the power on or off.
2.
key: For zero setting of the scale; range of zero set is 4% of total
capacity.
3.
key: Press this button to deduct the weight of the container..
4.
key: To print the displayed data.
5.
key: Press this button to toggle between different weighing units .
6.
key: For counting function.
DISPLAY
Low battery indicator weighing unit
indicator
Negative value indicator
STABLE
indicator
when the reading is stable.
indicator
2