MOD9000BNT BACnet Receiver Installation & Configuration
AUTOMATION COMPONENTS, INC Version : 1.0
2305 Pleasant View Road I0000674
Middleton, Wisconsin 53562
Page 19 of 37
www.workaci.com
(888) 967-5224
Again use the mouse to move to the next column. Enter a GROUP NAME, if
desired, for the data set by typing the group name in the cell.
Enter the name in the cell by using the mouse to click on the next column.
Note: DO NOT use commas or semicolons in the Group Name.
Enter a POINT NAME, if desired, for the data point by typing the name in the
cell. Enter the name in the cell by using the mouse to click on the next
column.
Note: DO NOT use commas or semicolons in the Point Name
Assign a sensor/transmitter to the data register by clicking in the
TRANSMITTER ID cell to open a drop down menu. This is the device ID of
the remote output devices (RD2432). Use the scroll bar to scroll to the correct
address or automatically scroll to the address by typing the hexadecimal
address in the cell. To select the address click on the appropriate ID in the
drop down menu.
