Stationary Photoionization Detector SPID2
User Manual
SPID2 - User Manual (en) - 1.11.docx
Analytical Control Instruments GmbH, Volmerstraße 9A, D-12489 BERLIN, Germany, www.aci-berlin.de
Version 1.11
Page 6 of 60
1.
General
The
company Analytical Control Instruments (hereinafter the ‘manufacturer’) provides with the
Stationary Photoionization Detector SPID2
(hereinafter the ‘device’)
a continuously measuring detector
for volatile organic compounds (VOCs) with a high stable hollow cathode lamp with Ceramic Discharge
Channel with an ionization potential < 10.6 eV. The use of new technologies for the excitation source
and the sensor allows a high stability of measurement and longer maintenance intervals. An integrated
active carbon filter and the circuit sampling an automatic purging and automatic calibration are
controlled.
2.
Safety and Usage Instructions
2.1.
Terms and Symbols
In this manual, certain common terms and symbols used to warn you of dangers or to give you
cautions that are important in avoiding injury or damage. Observe and follow these cautions and
regulations to avoid accidents and damage. These terms and symbols explained below.
DANGER
Indicates a hazardous situation, which, if not avoided, WILL result in death or serious
injury.
WARNING
Indicates a hazardous situation, which, if not avoided, COULD result in death of serious
injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, MAY in minor or moderate injury.
NOTICE
Indicates a property damage message.
Usage
Indicates a helpful information, hints or recommendation.
