PCIe Accelerator-6D Card User Guide (UG074)
Speedster FPGAs
11
Figure 5:
PCIe Accelerator-6D Board Connected in In-system Mode
Note
Power must still be provide to the board via an external power supply rather than the PCIe connector
and the dedicated power connectors on the board.
On-Board Memory
The development board has the following memories available for system design.
Twelve 204-pin DDR3 SO-DIMM connectors to allow for loading of 12 DDR3 SO-DIMMs each of which
has a performance of 12.8 Gbps or 1600 MT/s. This memory serves as the primary off-chip memory for all
applications, supplementing the on-chip BRAM. This memory also demonstrates the embedded DDR3
controller capability.
An 512 Mb SPI flash device used to store configuration bitstreams on board.
