Acer Veriton Z4621G, Service Manual

Page: 198 / 216

5-4 Jumper and Connector Locations
Jumper Setting
0
The section explains how to set jumper for correct configuration of the main board.
Setting Jumper
0
Use the mother board jumpers to set system configuration options. Jumpers with more Than
one pin are numbered. When setting the jumpers, ensure that the jumper caps are Placed on
the correct pins.
The illustrations show a 2-pin jumper.When the jumper cap is placed on both pins, the jumper
is SHORT.If you remove the jumper cap, or place the jumper cap on just one pin, the jumper
is OPEN.
Table 1-1.
No Label Description No Label Description
1 CPU socket LGA115 socket CPU 2 DIMM
DDR
Ⅲ
DIMM slot
3 PCIE x16 PCIE x16 slot 4 Camera Camera module
connector
5 LCD LCD connector 6 DVI DVI in connector
7 converter converter connector 8 3D scalar 3D scalar connector
9 Key Pad Key Pad connector 10 CPU fan CPU fan connector
11 SATA PWR SATA Power
connector 12 Front Panel Front Panel
connector
13 Bluetooth Bluetooth connector 14 Touch Panel Touch Panel
connector
15 IR IR connector 16 Speaker Speaker connector
17 VGA VGA connector(not
installed) 18 ME ME header
19 BIOS_WP BIOS_WP connector 20 Clear CMOS Clear CMOS
connector
21 SATA0-2 SATA connector 22 Battery RTC battery
23 SPI SPI header 24 LPC LPC header