Acer TravelMate 8481, Service Manual, Page: 78 / 229

2-26 System Utilities
Miscellaneous Tools
0
Using Boot Sequence Selector
0
The
Boot Sequence Selector
allows the boot order to be changed without accessing the
BIOS
Setup Utility
. To use the
Boot Sequence Selector
, perform the following:
1. At a DOS prompt, enter
bs
<#>
and a boot sequence ID number. A boot sequence ID is a
digit from 1 to 4.
Figure 2-32. Boot Sequence Selector
Example:
bs <2
>,
selects the boot sequence of
HDD | CD ROM | LAN | Floppy.
D:\BOOTSEQ>bs
*** Boot Sequence Selector Version 0.03 ***
Created by Rockwell Chuang 10/01/2005.
Usage:
BS [ 1 | 2 | 3 | 4 ]
BS 1: [Floppy] => [HardDisk] => [CD-ROM] => [LAN]
BS 2: [HardDisk] => [CD-ROM] => [LAN] => [Floppy]
BS 3: [CD-ROM] => [HardDisk] => [LAN] => [Floppy]
BS 4: [LAN] => [Floppy] => [HardDisk] => [CD-ROM]
D:\BOOTSEQ>