background image

81

Notice for New Zealand

1

The grant of a Telepermit for any item of terminal equipment indicates 
only that Telecom has accepted that the item complies with minimum 
conditions for connection to its network. It indicates no endorsement of 
the product by Telecom, nor does it provide any sort of warranty. Above 
all, it provides no assurance that any item will work correctly in all respects 
with another item of Telepermitted equipment of a different make or 
model, nor does it imply that any product is compatible with all of 
Telecom's network services.

2

This equipment is not capable, under all operating conditions, of correct 
operation at the higher speeds for which it is designed. Telecom will accept 
no responsibility should difficulties arise in such circumstances.

3

Some parameters required for compliance with Telecom's Telepermit 
requirements are dependent on the equipment (PC) associated with this 
device. The associated equipment shall be set to operate within the 
following limits for compliance with Telecom's Specifications:
c

There shall be no more than 10 call attempts to the same number 
within any 30 minute period for any single manual call initiation, and

d

The equipment shall go on-hook for a period of not less than 30 
seconds between the end of one attempt and the beginning of the 
next call attempt.

4

Some parameters required for compliance with Telecom's Telepermit 
requirements are dependent on the equipment (PC) associated with this 
device. In order to operate within the limits for compliance with Telecom's 
specifications, the associated equipment shall be set to ensure that 
automatic calls to different numbers are spaced such that there is not less 
than 5 seconds between the end of one call attempt and the beginning 
of another.

5

This equipment shall not be set up to make automatic calls to Telecom's 
111 Emergency Service.

6

This device is equipped with pulse dialing while the Telecom standard is 
DTMF tone dialing. There is no guarantee that Telecom lines will always 
continue to support pulse dialing.

7

Use of pulse dialing, when this equipment is connected to the same line as 
other equipment, may give rise to bell tinkle or noise and may also cause a 
false answer condition. Should such problems occur, the user should NOT 
contact the telecom Fault Service.

8

This equipment may not provide for the effective hand-over of a call to 
another device connected to the same line.

9

Under power failure conditions this appliance may not operate. Please 
ensure that a separate telephone, not dependent on local power, is 
available for emergency use.

 

Summary of Contents for P1.RCDYZ.MI4







































































































Reviews: