61 Altos R520 Installation Configuration Guide
Onboard VGA
8.24.3.0
EasyBUILD 7.1 build 400 (or later)
Onboard USB 2.0
N/A
OS built-in
IOAT
1.2.52.0
EasyBUILD 7.1 build 400 (or later)
Hot-swap
backplane
5.0.6055.2
EasyBUILD 7.1 build 400 (or later)
Software Required
The management utility of integrated SAS hardware RAID can be found in the
EasyBUILD.
Software Version
EasyBUILD
Version
RAID Web Console
2
1.13-07
EasyBUILD 7.1 build 400 (or later)
Intel PROSet Utility
10.4.4.2
EasyBUILD 7.1 build 400 (or later)
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS hardware RAID in the Windows
Server 2003. You need an external USB floppy drive to load driver during the
OS installation.
1.
As Windows 2000 can’t recognize the integrated SAS hardware RAID, you
need to make a driver diskette from the EasyBUILD first before the
installation.
2.
Press F6 at the start of installation to provide the driver disk for the
onboard ROMB.
3.
Select “Intel(R) SAS RAID Controller Driver (Windows 2000)” as target
driver
4.
After loading the driver from diskette, follow the normal procedure to
finish the installation.
Chipset Driver Installation
1.
After the installation completes, you would see the following other
devices listed in Device Manager.