Altos R520 Installation Configuration Guide
58
Installation Tips
NOTE. There is no built-in driver of onboard SATA RAID in the Windows Server
2003. You need an external USB floppy drive to load driver during the OS
installation.
1.
As Windows Server 2003 can’t recognize the onboard SATA RAID, you
need to make a driver diskette from the EasyBUILD first before the
installation.
2.
Press F6 at the start of installation to provide the driver disk for the
onboard SATA RAID.
3.
Select “Intel Embedded Server RAID Technology II (Windows XP/2003)” as
target driver
4.
After loading the RAID driver from diskette, follow the normal procedure
to finish the installation.
Chipset Driver Installation
1.
After the installation completes, you would see the following devices
with yellow mark in Device Manager.
2.
Please insert the EasyBUILD into the optical drive
3.
Expand Drivers -> Altos R520 -> Chipset, select Windows Server 2003 and
click on Setup.
4.
Follow the instruction to install the driver and reboot the server after the
chipset driver is installed.
