63 Altos R520 Installation Configuration Guide
IOAT Driver Installation
1.
For Base System Device, it should be the onboard IOAT device. You could
find the driver in Resource CD.
2.
Right-click on the Base System Device and select Properties.
3.
Select Driver tab and click on Update Driver.
4.
Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
5.
Check on the Specify a location and click on Next to specify the path for
the driver.
6.
Follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
Integrated Device – 1A38 listed in System devices.
Hot-swap Backplane Driver Installation
1.
There is a ESG-SHV SCA HSBP M11.... SCSI Enclosure Device listed under
Other device in Windows Device Manager. It is the hot-swap SAS
backplane for R520.
2.
Right-click on the ESG-SHV SCA HSBP M11.... SCSI Enclosure Device and
select Properties.
3.
Select Driver tab and click on Update Driver.
4.
Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
5.
Check on the Specify a location and click on Next to specify the path for
the driver.
6.
Follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel (r) SCA Hotswap Backplane
listed in System devices.
VGA Driver Installation
1.
There is a VGA controller (VGA Compatible) listed under Other devices in
Windows Device Manager. It is the ATI ES1000 for R520.
2.
Insert the EasyBUILD into the optical drive.
3.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000 and
double-click on Windows 2000.
4.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
5.
After installing the driver, you would see ATI ES1000 listed in Display
adapters.
