![background image](http://html.mh-extra.com/html/acer/imedia-s3811/imedia-s3811_service-manual_6214084.webp)
78
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the motherboard components.
Refer to the following:
1 Connect the CPU cooling fan cable to
CPU_FAN
.
2 Connect the standard power supply connector to
ATX_POWER
3 Connect the auxiliary case power supply connector to
ATX12V
.
4 Connect the case switches and indicator LEDs to the
F_PANEL
.
5
Connect the system cooling fan connector to
SYS_FAN
.
6.Connect the case speaker cable to
SPK
.
Connecting 24-pin power cable
Users please note that when installing 24-
pin power cable, the latche of power cable
falls on the left side of the ATX_POWER1connector
latch, just as the picture shows.
24-pin power cable
Summary of Contents for imedia S3811
