86
Follow these instructions to install an add-on card:
1.
Remove a blanking plate from the system case corresponding to the slot you are going to
use.
2.
Install the edge connector of the add-on card into the expansion slot. Ensure that the edge
connector is correctly seated in the slot.
3.
Secure the metal bracket of the card to the system case with a screw.
1.For some add-on cards, for example graphics adapters and network adapters,
you have to install drivers and software before you can begin using the add-on
card.
2. The onboard PCI interface does not support 64-bit SCSI cards.
Summary of Contents for imedia S3811
