Acer imedia S3811, Service Manual

Page: 88 / 99

82
CPU Installation Procedure
The following illustration shows CPU installation components.
A Opening of the Load Plate Put your thumb on the tail of the load
plate and press the tail down Rotate the load plate to fully open
position.
B. Disengaging of the Load Lever
·
Hold the hook of lever and pull it to the
left side to clear retention tab. Rotate the load lever to fully open
position.
C. Removing the Cap
·
Be careful not to touch the contact at any time.
D. Inserting the Package
·
Grasp the package. Ensure to grasp on
the edge of the substrate. Make sure pin 1 indicator is on your
bottom-left side. Aim at the socket and place the package
carefully into the socket by purely vertical motion.
E. Closing the Load Plate
·
Rotate the load plate onto the package IHS
(Intergraded Heat Spreader).
·
Engage the load lever while pressing
down lightly onto the load plate.
·
Secure the load lever with the hook
under retention tab.
F. Fasten the cooling fan supporting base onto the CPU socket on the motherboard.
G. Make sure the CPU fan is plugged to the CPU fan connector. Please refer to the
CPU cooling fan user
’
s manual for more detail installation procedure.
1. To achieve better airflow rates and heat dissipation, we suggest that
you use a high quality fan with 3800 rpm at least. CPU fan and
heatsink installation procedures may vary with the type of CPU fan/
heatsink supplied. The form and size of fan/heatsink may also vary.
2. DO NOT remove the CPU cap from the socket before installing a CPU.
3. Return Material Authorization (RMA) requests will be accepted
only if the motherboard comes with the cap on the LGA1156 socket.