3-10
User’s Manual
In this situation, there are four ways to enter hibernation mode:
•
Press the Standby/Hibernation button (
) with System Sleep Mode
set to
[Hibernate]
.
•
Set a value for the System Sleep Timer in Setup with System Sleep
Mode set to
[Hibernate]
. If the waiting time specified by this time
elapses without any system activity, the system goes into hibernation
mode.
•
Enable the Sleep Upon Battery-low parameter in Setup. If a battery-
low condition takes place, the notebook enters hibernation mode within
3 minutes.
•
Invoked by the operating system power saving modes
If the notebook beeps but does not enter hibernation mode
after pressing the sleep hot key, it means the operating system
does not allow the notebook to enter the power saving mode.
When the notebook enters hibernation mode, the whole system does not
consume any power. This is why hibernation mode is also called zero-volt
suspend.
To exit hibernation mode, press the power switch (
).
Do not change any system devices when the notebook is in
hibernation mode.
If the notebook detects a PC I/O card installed in the PC card
slots, the notebook can only enter standby mode, and not
hibernation mode.
Summary of Contents for Extensa 355
Page 1: ...Extensa 355 User s Manual ...
