Acer eMachines E628 Series Service Manual Download Page 49

Page: 49 / 224

Chapter 2

Miscellaneous Utilities

Using Boot Sequence Selector

Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. To use Boot
Sequence Selector, perform the following steps:

Enter into DOS.

Execute BS.exe to display the usage screen.

Select the desired boot sequence by entering the corresponding sequence, for example, enter BS2 to
change the boot sequence to HDD|CD ROM|LAN|Floppy.

Using DMITools

The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool
for hardware management.

When the BIOS displays

Verifying DMI pool data

it is checking the table correlates with the hardware before

sending to the operating system (Windows, etc.).

To update the DMI Pool, perform the following steps:

Enter into DOS.

Execute

dmitools.exe

. The following messages show dmitools usage:

IMPORTANT:

The following write examples (2 to 5) require a system reboot to take effect

Summary of Contents for eMachines E628 Series

































































































































































































































Search results

Summary of Contents for eMachines E628 Series

Reviews:

Acer eMachines E628 Series, Service Manual, Page: 49 / 224

Search results

Summary of Contents for eMachines E628 Series

Reviews: