Acer eMachines E628 Series Service Manual Download Page 19

Page: 19 / 224

Chapter 1

Indicators

The computer has several easy-to-read status indicators. The battery indicator is visible even when the
computer cover is closed.

NOTE:

Charging:

The battery light shows amber when the battery is charging. 2.

Fully charged:

The light

shows green when in AC mode.

Icon

Function

Description

Bluetooth

Indicates the status of Bluetooth communication.

Wireless LAN

Indicates the status of Wireless LAN communication.

3G communication

Indicates the status of 3G communication.

HDD

Indicates when the hard disk drive is active.

Num Lock

Lights up when Num Lock is activated.

Caps Lock

Lights up when Caps Lock is activated.

Battery

Indicates the computer's battery status.

Summary of Contents for eMachines E628 Series

































































































































































































































Search results

Summary of Contents for eMachines E628 Series

Reviews:

Acer eMachines E628 Series, Service Manual, Page: 19 / 224

Search results

Summary of Contents for eMachines E628 Series

Reviews: