Acer Aspire V5-573, Service Manual

Page: 192 / 376

3-82 Machine Maintenance Procedures
Replacing the Thermal Module (Discrete)
0
IMPORTANT
:
+
Apply approved thermal grease and ensure all heat pads are in position
before replacing module.
CAUTION :
!
Use caution when applying thermal grease. Thermal grease may cause
damage to the mainboard.
The following thermal grease types are approved for use:

Silmore GP50

Honeywell

Jet Motor 7762
The following thermal pads are approved for use:

Eapus XR-PE
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab
and Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU.
NOTE:
NOTE
:
Force used during installation of thermal module is sufficient to spread grease
evenly over CPU top.
3. Place the thermal module on the mainboard ( Figure 3-100 ).
Figure 3-100. Replacing the Thermal Module
4. Tighten five (5) captive screws (A) in numerical order from one (1) to five (5)
( Figure 3-16 ). Ensure the thermal module is properly aligned and seated.