Acer Aspire E650, Service Manual

Page: 21 / 95

Chapter 1 11
1.
Boot to Window XP.
2.
Press <Alt> + <F10> to open the Acer eRecovery utility.
3.
Enter the password to proceed. The default password is six zeros.
4.
In the Acer eRecovery window, select Recovery settings and click Next .
5.
In the Recovery settings window, select Burn image to disc and click Next .
6.
In the Burn image to disc window, select Factory default image and click Next .
7.
Follow the instructions on screen to complete the process.
Re-install Bundled Software without CD
Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation.
1.
Boot to Windows XP.
2.
Press <Alt> + <F10> to open the Acer eRecovery utility.
3.
Enter the password to proceed. The default password is six zeros.
4.
In the Acer eRecovery window, select Recovery actions and click Next .
5.
In the Recovery settings window, select Re-install applications / drivers and click Next .
6.
Select the desired driver / application and follow the instructions on screen to re-install.
After first launch, Acer eRecovery prepares all the needed software and may take few seconds to
bring up the software content window.
Change Password
Acer eRecovery and Acer disc-to-disc recovery are protected by a password that can be changed
by the users. Follow the steps below to change the password in Acer eRecovery.
1.
Boot to Window XP.
2.
Press <Alt> + <F10> to open the Acer eRecovery utility.
3.
Enter the password to proceed. The default password is sex zeros.
4.
In the Acer eRecovery window, select Recovery settings and click Next .
5.
In the Recovery settings window, select Password: Change Acer eRecovery password and
click Next .
6.
Follow the instructions on screen to complete the process.