25 Altos R920
Installation Configuration Guide
7.
Click on
Next
and follow the instruction to finish the
driver update.
8.
After installing the driver, you would see
STMicroelectronics Trusted Platform Module
listed in
System devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device.
You can find the ATI ES1000 driver in EasyBUILD 8.0 build
100. Please insert the EasyBUILD 8.0 build 100 into the
optical drive.
2.
Expand
Drivers -> Altos R920 -> Graphics adapters -> ATI
ES1000
, select
Windows Server 2003
and click on
Setup
.
3.
Follow the instruction to install the VGA driver and
reboot the server after the driver is installed.
4.
After installing the driver, you would see
ATI ES1000
listed in Display adapters.
Gigabit Ethernet Driver Installation (I/O Expansion Module)
If the optional I/O Expansion module is installed on Altos
R920, there are two additional Intel 82575EB Gigabit Ethernet
available on Altos R920.
1.
For the two more
Ethernet Controller
listed under
Other
device
in Windows Device Manager, it should be the Intel
82575EB Gigabit Ethernet controller on the I/O Expansion
module. You could find the driver in EasyBUILD 8.0 build
100. Please do the same on both of the devices.
2.
Right-click on the
Ethernet Controller
and select
Update
Driver
.
3.
Select
No, not this time
. Do not connect to Windows
Update to search the driver.
4.
Select
Install from a list or specific location
(Advanced)
.
5.
Select
Search the best driver these locations
and check
Include this location in the search
.
6.
Click on
Browse
and specify the path for the driver.
Please refer to the EasyBUILD Version 8.0 build 100 for
NIC driver in Driver required section.
7.
Click on
Next
and follow the instruction to finish the
driver update.
