23 Altos R920
Installation Configuration Guide
Gigabit Ethernet Driver Installation
1.
There are two
Ethernet Controller
listed under
Other
device
in Windows Device Manager. It should be the
onboard Intel 82563EB Gigabit Ethernet controller. You
could find the driver in EasyBUILD 8.0 build 100. Please
do the same on both of the devices.
2.
Right-click on the
Ethernet Controller
and select
Update
Driver
.
3.
Select
No, not this time
. Do not connect to Windows
Update to search the driver.
4.
Select
Install from a list or specific location
(Advanced)
.
5.
Select
Search the best driver these locations
and check
Include this location in the search
.
6.
Click on
Browse
and specify the path for the driver.
Please refer to the EasyBUILD Version 8.0 build 100 for
NIC driver in Driver required section.
7.
Click on
Next
and follow the instruction to finish the
driver update.
8.
After installing the driver, you would see
Intel(R)
PRO/1000 EB Network Connection with I/O Acceleration
listed in Network adapters.
IOAT Driver Installation
1.
For
Base System Device
listed under
Other device
in
Windows Device Manager, it should be the IOAT device. You
could find the driver in EasyBUILD 8.0 build 100.
2.
Right-click on the
Base System Device
and select
Update
Driver
.
3.
Select
No, not this time
. Do not connect to Windows
Update to search the driver.
4.
Select
Install from a list or specific location
(Advanced)
.
5.
Select
Search the best driver these locations
and check
Include this location in the search
.
6.
Click on
Browse
and specify the path for the driver.
Please refer to the EasyBUILD Version 8.0 build 100 for
IOAT driver in Driver required section.
7.
Click on
Next
and follow the instruction to finish the
