Altos R920 Installation Configuration Guide
16
1.
As Windows Server 2003 x64 R2 can’t recognize the
integrated SAS hardware RAID, you need to make a driver
diskette from the EasyBUILD 8.0 build 100 first before
the installation.
2.
Press F6 at the start of installation to provide the
driver disk for the integrated SAS hardware RAID.
3.
Select “
Intel SAS RAID Controller Driver (Server 2003 for
x64)
” as target driver.
4.
After loading the RAID driver from diskette, follow the
normal procedure to finish the installation.
Chipset Driver Installation
1.
After the installation completes, you would see the
following devices with yellow mark in Device Manager.
2.
Please insert the EasyBUILD 8.0 build 100 into the
optical drive
3.
Expand
Drivers -> Altos R920 ->
Chipset
, select
Windows
Server 2003 x64
and click on
Setup
.
4.
Follow the instruction to install the driver and reboot
the server after the chipset driver is installed.
