Altos R920 Installation Configuration Guide
12
Software Required
The management utility for integrated SAS hardware RAID and
NIC can be found in the EasyBUILD 8.0 build 200 (or later).
Software Version
EasyBUILD
Version
RAID Web
Console 2
2.34
EasyBUILD 8.0 build 200 (or
later)
PROSet Utility
13.0.44.0
EasyBUILD 8.0 build 200 (or
later)
Configuring Integrated SAS Hardware RAID
Please refer to the Appendix A. for the integrated SAS
hardware RAID configuration.
Installation Tips
NOTE. The Windows Server 2008 x64 can recognize integrated SAS
hardware RAID. Please replace the driver with the one provided
by EasyBUILD. You need an external USB floppy drive or USB
Flash drive to load driver during the OS installation.
1.
Please make a driver diskette from the EasyBUILD first
before the installation.
2.
Click on “Load Driver” when “Where do you want to install
Windows” message displayed.
3.
Select “
Integrated
Intel(R) RAID Controller SROMBSASFC
(A:\oemsetup.inf)
” as target driver
4.
After loading the RAID driver from diskette, you could
click “Drive options” to partition the drive.
5.
Follow the normal procedure to finish the installation.
6.
After the installation completes, you would see the
following devices with yellow mark in Device Manager.
