Appendix B: SATA RAID configuration
108
Creating the RAID 1 volume
1
In the onboard LSI RAID Configuration Utility, select
Configuration
from the Management menu.
2
Select
New Configuration
from the Configuration menu, then
select
YES
to continue.
An array selection window displays the devices connected to the
current controller.
3
Press the arrow keys to choose the specific physical drives, then
press the space bar to associate the selected drive with the current
array.
The indicator for the selected drive change from READY to
ONLINE.
4
Add two more drives to the current array, then press
Enter
.
5
Press
Enter
again to select another array to configure.
6
Press the space bar to select the array, then press
F10
to configure
the logical drive.
7
Accept the default RAID level (RAID1), then press
Enter
to return
to the array selection window.
8
Press
Enter
to end the array configuration.
9
Select
YES
to save the configuration, then press any key to return
to the Configuration menu.
Initializing the RAID volume
1
Press
Esc
to return to the Management menu.
2
Select
Initialize
from the Management menu.
All logical drives should be listed under Logical Drives.
3
Press the space bar to select the drives for initialization.
The selected drive will be shown in yellow.
4
Press
F10
, then select
YES
to start the initialization process.
5
Once initialization is complete, press any key to continue.
6
Press
Esc
to return to the Management menu.
7
Press
Esc
, then select
YES
to close the configuration utility.
8
Press
Ctrl
+
Alt
+
Del
to reboot the system, then proceed to the OS
installation.
Summary of Contents for Altos G330 Series
