Acer Altos EasyStore, User Manual, Page: 86 / 169

Altos easyStore Manual 79
Chapter 3 Managing Your Storage System
79
To change the disk configuration:
1. In the navigation bar, click Advanced .
2. In the left pane, click Disks .
3. In the Administrator password text box, enter your password for logging in to
the Manager.
4. Click Reconfigure Disks .
5. When the confirmation message displays, click OK .
The Disk Configuration page displays. (The options that appear on this page
vary, depending on the number of hard disks that are currently installed in the
system.)
6. If you want to add or remove hard disks, do so one at a time and click Scan after
each action.
To accept the default disk configuration (which will provide the best level of data
protection available for the number of hard disks currently installed), click
Next . By
default, a linear disk configuration is used for a single hard disk, RAID 1 is used for
two hard disks, and RAID 5 is used for three or four hard disks.
If you want to change the disk configuration, select the desired RAID level and
then click
Next . (For detailed information about the different RAID levels, refer to
Appendix B, "Disk Configurations." )