Chapter 1 - System Board 1-11
The system settings are configured at the
factory for the correct CPU frequency/
Memory DIMM combination. If you upgrade
the CPU frequency to 300, 350, 400, or 450
MHz, the memory controller requires PC-100
DRAM DIMMs. Your system will not work
properly if you use standard DIMMs with the
higher speed CPUs. All of the installed
DIMMs must have the same capabilities.
2.
Press the latches on the sides to lock the processor module into place.
Figure 1-5 Securing the Pentium II Processor
3.
Connect the fan connectors. See Table 1-2.
