AcerAltos 330 Series User’s Guide
2
Booting the computer from a SCSI drive,
3-28
Bus frequency, 2-34
C
Cache scheme, 2-29
CD-ROM drive DMA mode, 2-15
Component installation, 4-11
ESD precautions, 4-11
Computer hangs, or SCSI controller
cannot always find the drives, 3-30
Configure/view host adapter settings
menu, 3-7
Configuring multiple SCSI controllers,
3-21
Configuration table, 2-25
Connector functions, 1-5
Correcting error conditions, 1-22
Cover installation, 4-22
Front panel, 4-24
Left cover, 4-22
Right cover, 4-23
CPU frequency, 2-34
CPU multiple, 2-34
D
Date, 2-26
Date and time, 2-26
Date, 2-26
Time, 2-27
Default values, 3-4
Device connected, but not ready, 3-26
Disk drive configuration problems, 3-27
Disk drive control, 2-40
Disk drives, 2-10
Advanced PIO mode, 2-15
CD-ROM drive DMA mode, 2-15
Floppy drives, 2-10
Hard disk block mode, 2-14
Hard disk size > 504 MB, 2-14
IDE drives, 2-12
LS-120 drive compatible as, 2-11
Disk drives over 1 Gbyte
Extended translation, 3-22
Using Fdisk, 3-23
When to use extended translation, 3-
23
Display <Ctrl-A> message during BIOS
initialization, 3-18
DMI BIOS version, 2-9
Drive control settings, 2-40
E
ECP DMA channel, 2-18
Enable disconnection, 3-14
Enter setup, 2-1
Entering setup, 2-1
Error conditions, correcting, 1-22
Error messages, 1-18, 1-19
Correcting, 1-22
Software, 1-19
System, 1-19
ESD precautions, 1-8, 4-11
Executing AFlash, 3-2
Exit setup, 2-42
Extended translatiion, 3-22
External cache, 2-5, 2-29
F
Fast boot, 2-24
Features, 1-1, 4-4
Front panel, 4-4, 4-7
Internal components, 4-6
Rear panel, 4-5
First hard disk drive, 2-24
Floppy disk controller, 2-19
Floppy drive A, 2-5
Floppy drive B, 2-6