![background image](http://html.mh-extra.com/html/acer/acerpower-8400/acerpower-8400_user-manual_5735090.webp)
Chapter 4
Upgrading the System
80
Upgrading the CPU
Removing the CPU
Note:
Observe the ESD precautions on page 73 when installing or
removing a system component.
Before you can replace or upgrade your processor, you need
to remove the previously installed processor on the system
board.
Follow these steps to remove the CPU:
1.
On the system board, locate the CPU mounted on the
socket.
2.
Detach the fan/heatsink cable connectors.
Ap8400-e.book Page 80 Friday, October 1, 1999 2:20 PM
Summary of Contents for AcerPower 8400
