Chapter 3
Award BIOS
58
PnP/PCI Configuration
The table below describes the parameters found in this menu.
Settings in
boldface
are the default and suggested settings.
Parameter
Description
Options
PnP OS Installed
Normally, the PnP resources are
allocated by BIOS during the POST
(Power-on self-test). If you are using
a PnP operating system (such as
Windows 95/98), set this item to
Yes
to inform BIOS to configure only the
resources needed for booting (VGA/
IDE or SCSI). The rest of the system
resources will be allocated by the
PnP operating system.
No
Yes
Resources
Controlled By
Setting this option to
Manual
allows
you to individually assign the IRQs
and DMAs to the ISA and PCI
devices. Set this to
Auto
to enable
the auto-configuration function.
Auto
Manual
Ap8400-e.book Page 58 Friday, October 1, 1999 2:20 PM
Summary of Contents for AcerPower 8400
