System Housing
2-37
2.9
Cable Connections
The power backplane is complete with connectors to accommodate
the power cables for all the system components. Each cable is
labeled with a cable number, and each cable’s point (head and tail) is
also numbered, because each cable can only fit one way and is not
interchangeable. For a list of all the cables and their respective
connectors, please refer to the power cable list in this section.
The figure below illustrates the power cables that connect to the
system board and the SCSI backplane board.
CN# - System board connectors
C# - Cable number
P# - Cable point (head and tail)
Power Backplane Board
SCSI Backplane
Board
System Board
C1:P
C1:P2
C2:P
C3:P
C2:P2
C3:P2
C4:P
C4:P
CN9
CN22
CN15
CN15