4-30
AcerAltos 21000 System Guide
PnP/PCI System Configuration
Page 2/2
PCI IRQ Sharing ............... [No]
VGA Palette Snoop .............. [Disabled]
Reset Resource Assignments ..... [No]
↑↓
= Move Highlight Bar,
→
←
= Change Setting, F1 = Help
PCI IRQ Setting
This parameter allows for
Auto
or
Manual
configuration of PCI
devices. If you use plug-and-play (PnP) devices, set this parameter
to
Auto
. The system then automatically assigns IRQs to PnP
devices. If your PCI device is not PnP, you can manually assign the
interrupt for each device. Refer to your PCI card manual for more
information.
When the PCI IRQ Setting is set to
Auto
, all the
IRQ setting fields become gray and non-
configurable.
PCI Slots
These parameters allow you to specify the appropriate interrupt for
each of the PCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7,
IRQ9, IRQ10, IRQ11, IRQ12, IRQ14, or IRQ15 to the slots.
Make sure that the interrupt you assign to the
various PCI slots are not used by other devices
to avoid conflicts.
