manualshive.com logo in svg

Acer 510 Series, User Manual, Page: 36 / 149

Share
Download
Acer 510 Series User Manual Download Page 36

Keyboard

14

 User’s Guide

Fn-F3

Standby

Puts the computer in 
Standby mode.  Press any 
key to return.

See “Standby Mode” on 
page 41 to learn more 
about Standby mode.

Fn-F4

Hibernation/
Sleep

Puts the computer in 
Hibernation/Sleep mode (if 
Sleep Manager, the 
hibernation utility, is 
installed, valid and 
enabled).  Press the power 
switch to resume.

Otherwise, the computer 
issues a warning beep 
and continues operation.  
See “Hibernation Mode” 
on page 42 for more about 
Hibernation mode.

Fn-F5

Display 
toggle

Switches display output 
between the display 
screen, external monitor (if 
connected) and both the 
display screen and 
external monitor.

Fn-F6

Screen blank

Turns the display screen 
backlight off to save 
power.  Press any key to 
return.

Fn-F7

Touchpad 
on/off

Turns the internal 
touchpad on and off.

When you connect an 
external PS/2 mouse, the 
computer automatically 
disables the touchpad.

HotKey

Icon

Function

Description

510.book : 510-1.fm  Page 14  Thursday, March 4, 1999  1:03 PM

Summary of Contents for 510 Series






















































































































































Reviews:

No comments