manualshive.com logo in svg

Acer 510 Series, User Manual, Page: 102 / 149

Share
Download
Acer 510 Series User Manual Download Page 102

Notebook Manager

80

 User’s Guide

Notebook Manager

The computer has a built-in system setup program called 
Notebook Manager.  The Windows-based Notebook Manager 
allows you to set passwords, the startup sequence of the 
drives and power management settings.  It also shows 
current hardware configurations.

To start the Notebook Manager, press 

Fn-F2 

or follow these 

steps:

1.

Click on 

Start

, 

Programs

, then 

Notebook Manager

.

2.

Select the 

Notebook Manager

 application to run the 

program.

Notebook Manager consists of six sections:

T

Information Viewer

T

POST

T

Boot Sequence

T

Password

T

Power Management (Option displayed on the Windows 
98 ACPI

1

 setup screen)

T

Display Device

1

Will be supported in the future.

Note: 

Certain hotkey functions are disabled when you 

access Notebook Manager because those functions are 
also found in the Notebook Manager.

Note: 

Changes made to most settings in the Notebook 

Manager take effect the next time the computer restarts.  If 
you make changes in the Power Management and Display 
Device screens, these changes take effect immediately.

510.book : 510-5.fm  Page 80  Thursday, March 4, 1999  1:03 PM

Summary of Contents for 510 Series






















































































































































Reviews:

No comments