manualshive.com logo in svg

Acer 510 Series, User Manual, Page: 123 / 149

Share
Download
Acer 510 Series User Manual Download Page 123

BIOS Utility

Chapter 5  Software 

101

6.

Press 

Esc

.  The following dialog box appears.

7.

Select 

Yes

 and press 

Enter

 to save the password and 

exit the BIOS Utility.

Changing a Password

To change a password, follow the same steps used to set a 
password. 

Removing a Password

To remove a password, use the 

n

 and 

p

 keys to highlight a 

password parameter and press the “Enter” key as the first 
character.

Password Icons

Below are the password icons and their descriptions:

Parameters

Description

Power-on Password Icon

When set to present, prompts 
the user to input the correct 
password for the system to 
continue.  It is shown after the 
TravelMate logo. 

Hard Disk Password Icon

When set to present, prompts 
the user to input the correct 
password for the hard disk to 
operate.  It is shown after the 
Power-on Password Icon.

510.book : 510-5.fm  Page 101  Thursday, March 4, 1999  1:03 PM

Summary of Contents for 510 Series






















































































































































Reviews:

No comments