manualshive.com logo in svg

Acer 510 Series, User Manual, Page: 124 / 149

Share
Download
Acer 510 Series User Manual Download Page 124

BIOS Utility

102

 User’s Guide

Password Character Icon

When typing the characters of 
the password, the screen 
displays this icon for each 
character instead of the actual 
password character.

Wrong Password Icon

If the wrong password is 
entered, this icon will be 
displayed beside the wrong 
password.

Successful Password Entry 
Icon

If the password is correctly 
entered, this icon will be 
displayed beside the correctly 
entered password.

Failure Password Icon

The system allows the user 3 
chances to type the correct 
password.  After the password 
has been incorrectly entered 3 
times, this icon will be displayed 
together with a short message 
stating “system shut-down”.  The 
user then has to reboot the 
system ito try to type the correct 
password again.

Parameters

Description

510.book : 510-5.fm  Page 102  Thursday, March 4, 1999  1:03 PM

Summary of Contents for 510 Series






















































































































































Reviews:

No comments