ACEGER Cruiser Bike, Owner'S Manual

Page: 11 / 28

7
Note:
The 26 inch bike of this model has the V-brake on the front
fork,please match the front fender bracket to the bolt in a similar
way.
Then tighten it with screwdriver or 10mm wrench.
Remove the bolt from the fork-end.
Note
If the fender is warped and rubbing against the
tire,please scan the QR code or browse the link below
to fix.
https://www.youtube.com/watch?v=T0kq_lhZxks
Use the screwdriver and 8mm wrench to loosen the
two bolts on the curved strut plate.
Push the fender to the correct position so that it does not rub
against the tire.
Tighten the two bolts on the curved strut plate.
Match the fender arms to the fork hole,then insert the bolt and
tighten.
Important
Set the front fender and fork the correct position as shown in the
pictures,do not be opposite direction.