ACEGER Cruiser Bike, Owner'S Manual

Page: 15 / 28

11
6．Install Pedals
The left pedal（marked L）should be tightened to the
counter-clockwise direction.
The right pedal（marked R) should be tightened to the clockwise
direction.(as the inllustration shows)
7．Install Seat and Rear Reflector
Loosen the nuts on both sides of seat with 14mm wrench.
Then .pull the seat post into a vertical position and retighten the
nuts.
Important
Stop if you feel resistance! This may be an indication the spindle is
entering the hole at an angle. Remove the pedal and try again.