User's Guide MEZ1500-WinCE
41
All Content Copyright © 2012 Aceeca International Limited All Rights Reserved
1.
Select
Start
>
Settings
>
Control Panel
, and double-tap the
Power
icon.
2.
Tap the
Power Off
tab.
Figure 3-31
Power Settings Window - Schemes Tab
3.
Select desired options for entering reduced power states.
NOTE:
The time choices represent the amount of time that must pass before the system will switch to the next power
conservation state. For example, if "Switch state to System Idle:" is set to "After 5 minutes," then the system
will transition from the User Idle state to the System Idle state after 5 minutes of inactivity.
Even if a time of "Never" is selected, the system may still enter a lower power conservation state if
circumstances warrant. For instance, if "Switch state to Suspend:" is set to "Never," the battery reaching a
critical level might still cause the system to suspend.
TIP:
Shorter times will help conserve batteries.
3.15.3 Device Status Tab
The
Device Status
window is used to check the power levels on your device.
1.
Select
Start
>
Settings
>
Control Panel
, and double-tap the
Power
icon.
2.
Tap the
Device Status
tab.
Summary of Contents for MEZ1500-WinCE
