Ace MUSTANG W640SR, User Manual

Page: 36 / 282

1 - 4 System Startup
Quick Start Guide
1
System Startup
1. Remove all packing materials, and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3.
When first setting up the computer use the following procedure
(as to safeguard the computer during
shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and
initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter and
leave it there for 6 seconds or longer
.
• Remove the adapter cord from the computer’s DC-In jack, and then plug it back in again; the battery will now be unlocked.
4. Use one hand to raise the lid/LCD to a comfortable viewing angle (
do not exceed 180 degrees - or 130 degrees
if the system is docked to the docking station or has a 9 cell battery inserted
); use the other hand to support
the base of the computer (
Note
:
Never
lift the computer by the lid/LCD).
180
°

Shutdown
Note that you should always shut your computer down by choosing the
Shut Down
com-
mand in
Windows
(see page
1 - 34
). This will help prevent hard disk or system problems.

LCD Open Angle
The
LCD may be opened to 180 de-
grees
, however if the
9 cell battery
is
inserted, or
the computer is docked
to the docking station
, the angle
should not exceed 130 degrees
.
Figure 1 - 1
Opening the Lid/LCD